View UPG2214TK_3203560.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features nec's ? w low voltage l, s- band spdt switch description UPG2214TK nec' s UPG2214TK is a gaas mmic l, s-band spdt (single pole double throw) switch for mobile phones and other l, s-band applications from 0.5 to 3.0 ghz. this device can operate from 1.8 to 5.3 v with low insertion loss and high isolation. performance is speci?ed at both 1.8 v and 3.0 v. the UPG2214TK is housed in a 6-pin pb free low pro?le package suitable for high-density surface mounting. applications ? l, s-band digital cellular and cordless telephones ? bluetooth tm , w-lan, and wll ? short range wireless california eastern laboratories ordering information remark to order evaluation samples, contact your nearby sales of?ce. part number for sample order: u pg 2214 tk-a caution observe precautions when handling because these devices are sensitive to electrostatic discharge. ? switch control vol tage : v cont (h) = 1.8 to 5.3 v (3.0 v typ.) v cont (l) = ? 0.2 to +0.2 v (0 v typ.) ? low insertion loss : 0.25 db typ. @ 0.05 to 0.5 ghz 0.25 db typ. @ 0.5 to 1.0 ghz 0.30 db typ. @ 1.0 to 2.0 ghz 0.35 db typ. @ 2.0 to 2.5 ghz 0.35 db typ. @ 2.5 to 3.0 ghz ? high isolation : 32 db typ. @ 0.05 to 0.5 ghz 28 db typ. @ 0.5 to 1.0 ghz 27 db typ. @ 1.0 to 2.0 ghz 26 db typ. @ 2.0 to 2.5 ghz 24 db typ. @ 2.5 to 3.0 ghz ? power handling : p in (1 db) = +27.0 dbm typ. @ 0.5 to 3.0 ghz, v cont (h) = 3.0 v/ 0 v p in (1 db) = +20.0 dbm typ. @ 0.5 to 3.0 ghz, v cont (h) = 1.8 v/ 0 v ? h igh-density surface mounting : 6-pin lead-less package (1.5 1.1 0.55 mm) ? pb free part number package marking supplying form UPG2214TK-e2-a 6-pin super minimold g 4 k ? embossed tape 8 mm wide ? pin 1, 6 face the perforation side of the tape ? qty 5 kpcs/reel
UPG2214TK absolute maximum ratings (t a = 25c, unless otherwise speci?ed) recommended operating range (t a = 25c, unless otherwise speci?ed) pin connections pin no. pin name 1 output1 2 gnd 3 output2 4 v cont2 5 input 6 v cont 1 parameter symbol min. typ. max. unit switch control voltage (h) v cont(h) 1.8 3.0 5.3 v switch control voltage (l) v cont(l) ? 0.2 0 0.2 v note | v cont1 - v cont2 | 6.0 v (t op v iew) 1 2 3 4 5 6 g4k (bottom v iew) 6 5 4 3 2 1 (t op v iew) 1 2 3 4 5 6 truth table parameter symbol ratings unit switch control voltage v cont +6.0 note v input power p in +30 dbm operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 55 to +150 c v cont1 v cont2 input - output1 input - output2 low high on off high low off on
electrical characteristics (t a = +25 c, v cont (h) = 3.0, v cont (l) = 0 v , dc blocking capacitors value = 100 pf, unless otherwise speci?ed) UPG2214TK UPG2214TK notes 1. dc blocking capacitors = 1,000 pf at f = 0.05 to 0.5 ghz 2. p in (0.1 db) is the measured input power level when the insertion loss increases 0.1 db more than that of linear range. 3. p in (1 db) is the measured input power level when the insertion loss increases 1 db more than that of linear range. parameter symbol test conditions min. typ. max. unit insertion loss 1 l ins1 f = 0.05 to 0.5 ghz note 1 ? 0.25 0.45 db insertion loss 2 l ins2 f = 0.5 to 1.0 ghz ? 0.25 0.45 db insertion loss 3 l ins3 f = 1.0 to 2.0 ghz ? 0.30 0.50 db insertion loss 4 l ins4 f = 2.0 to 2.5 ghz ? 0.35 0.55 db insertion loss 5 l ins5 f = 2.5 to 3.0 ghz ? 0.35 0.60 db isolation 1 isl1 f = 0.05 to 0.5 ghz note 1 29 32 ? db isolation 2 isl2 f = 0.5 to 1.0 ghz 25 28 ? db isolation 3 isl3 f = 1.0 to 2.0 ghz 24 27 ? db isolation 4 isl4 f = 2.0 to 2.5 ghz 23 26 ? db isolation 5 isl5 f = 2.5 to 3.0 ghz 21 24 ? db input return loss 1 rl in1 f = 0.05 to 0.5 ghz note 1 15 20 ? db input return loss 2 rl in2 f = 0.5 to 3.0 ghz 15 20 ? db output return loss 1 rl out1 f = 0.05 to 0.5 ghz note 1 15 20 ? db output return loss 2 rl out2 f = 0.5 to 3.0 ghz 15 20 ? db 0.1 db loss compression input power note 2 p in (0.1 db) f = 2.0/2.5 ghz +21.0 +23.0 ? dbm f = 0.5 to 3.0 ghz ? +23.0 ? dbm 1 db loss compression input power note 3 p in (1 db) f = 0.5 to 3.0 ghz ? +27.0 ? dbm 2nd harmonics 2f 0 f = 2.0 ghz, p in = +15 dbm ? ? 55 ? 47 dbc f = 2.5 ghz, p in = +15 dbm ? ? 55 ? 47 dbc 3rd harmonics 3f 0 f = 2.0 ghz, p in = +15 dbm ? ? 55 ? 47 dbc f = 2.5 ghz, p in = +15 dbm ? ? 55 ? 47 dbc intermodulation intercept point iip 3 f = 0.5 to 3.0 ghz, 2 tone, p in = +16 dbm, 5 mhz spicing ? +58 ? dbm switch control current i cont ? 4 20 a switch control speed t sw 50% ctl to 90/10% rf ? 20 200 ns
UPG2214TK UPG2214TK electrical characteristics (t a = +25 c, v cont (h) = 1.8, v cont (l) = 0 v , dc blocking capacitors value = 100 pf, unless otherwise speci?ed) notes 1. dc blocking capacitors = 1,000 pf at f = 0.05 to 0.5 ghz 2. p in (0.1 db) is the measured input power level when the insertion loss increases 0.1 db more than that of linear range. 3. p in (1 db) is the measured input power level when the insertion loss increases 1 db more than that of linear range. caution it is necessary to use dc blocking capacitors with this device. the value of dc blocking capacitors should be chosen to accommodate the frequency of operation, bandwidth, switching speed and the condition with the actual board of your system. the range of recommended dc blocking capacitor value is less than 100 pf for frequencies above 0.5 ghz, and 1,000 pf for frequencies below 0.5 ghz. parameter symbol test conditions min. typ. max. unit insertion loss 6 l ins6 f = 0.05 to 0.5 ghz note 1 ? 0.25 0.50 db insertion loss 7 l ins7 f = 0.5 to 1.0 ghz ? 0.25 0.50 db insertion loss 8 l ins8 f = 1.0 to 2.0 ghz ? 0.30 0.55 db insertion loss 9 l ins9 f = 2.0 to 2.5 ghz ? 0.35 0.60 db insertion loss 10 l ins10 f = 2.5 to 3.0 ghz ? 0.35 0.65 db isolation 6 isl6 f = 0.05 to 0.5 ghz note 1 27 30 ? db isolation 7 isl7 f = 0.5 to 2.0 ghz 23 27 ? db isolation 8 isl8 f = 2.0 to 2.5 ghz 21 25 ? db isolation 9 isl9 f = 2.5 to 3.0 ghz 20 24 ? db input return loss 3 rl in3 f = 0.05 to 3.0 ghz note 1 15 20 ? db output return loss 3 rl out3 f = 0.05 to 3.0 ghz note 1 15 20 ? db 0.1 db loss compression input power note 2 p in (0.1 db) f = 2.0/2.5 ghz +14.0 +17.0 ? dbm f = 0.5 to 3.0 ghz ? +17.0 ? 1 db loss compression input power note 3 p in (1 db) f = 0.5 to 3.0 ghz ? +20.0 ? dbm switch control current i cont ? 4 20 a switch control speed t sw 50% ctl to 90/10% rf ? 20 200 ns
UPG2214TK evaluation circuit v cont 1 v cont 2 output1 output2 input c0 not e c0 c0 1,000 pf 1,000 pf 4 5 6 3 2 1 note c0 : 0.05 to 0.5 ghz 1,000 pf : 0.5 to 3.0 ghz 100 pf the application circuits and their parameters are for reference only and are not intended for actual design-ins.
UPG2214TK illustration of the test circuit assembled on evaluation board c3 c5 c1 c 2 c 4 6pin l2mm spdt sw vc1 vc2 in out 1 out 2 c1 c1 c1 c2 c2 v cont 2 output2 input output1 v cont 1 g4k using the nec evaluation board symbol values c1, c2, c3 100 pf c4, c5 1,000 pf
package dimensions 6-pin lead-less minimold (1511) (unit: mm) upg2214t k r emark ( ) : reference value 0.480.05 0.480.05 1.50.1 1.30.05 1.10.1 0.550.03 0.1 1 +0.1 -0.0 5 0.160.05 0.90.1 0.20.1 (bottom v iew) (t op v iew)
upg2214t k typcial characteristics (t a = +25oc, v count (h) = 3.0 v, v cont(l) = 0 v, dc blocking capacitors = 100 pf, unless otherwise speci?ed) insertion loss l in s (db) frequency f (ghz) input -output1 inser tion loss vs. frequency insertion loss l in s (db) frequency f (ghz) input -output2 inser tion loss vs. frequency 4 5 2 1 0 -2 -4 -5 2.0 3.5 1.0 1.5 2.5 3.0 0.5 3 -1 -3 4 5 2 1 0 -2 -4 -5 2.0 3.5 1.0 1.5 2.5 3.0 0.5 3 -1 -3 2 1 3 4 5 2 1 3 4 5 2: -0.695 db 1.5 ghz 1: -0.565 db 1.0 ghz 3: -0.858 db 2.0 ghz 4: -0.984 db 2.5 ghz 5: -1.180 db 3.0 ghz 2: -0.695 db 1.5 gh z 1: -0.571 db 1.0 gh z 3: -0.848 db 2.0 gh z 4: -0.981 db 2.5 gh z 5: -1.151 db 3.0 gh z remark the graphs indicate nominal characteristics. caution these characteristics values include the losses of the nec evaluation board.
UPG2214TK UPG2214TK remark the graphs indicate nominal characteristics. isolation isl (db) frequency f (ghz) input -output1 isola tion vs. frequency isolation isl (db) frequency f (ghz) input -output2 isola tion vs. frequency input return loss rl in (db) frequency f (ghz) input -output1 input return loss vs. frequency input return loss rl in (db) frequency f (ghz) input -output2 input return loss vs. frequency output return loss rl out (db) frequency f (ghz) input -output1 output return loss vs. frequency output return loss rl out (db) frequency f (ghz) input -output2 output return loss vs. frequency 40 50 20 10 0 -20 - 40 -50 2.0 3.5 1.0 1.5 2.5 3.0 0.5 30 -10 -30 40 50 20 10 0 -20 - 40 -50 2.0 3.5 1.0 1.5 2.5 3.0 0.5 30 -10 -30 40 50 20 10 0 -20 - 40 -50 2.0 3.5 1.0 1.5 2.5 3.0 0.5 30 -10 -30 40 50 20 10 0 -20 - 40 -50 2.0 3.5 1.0 1.5 2.5 3.0 0.5 30 -10 -30 40 50 20 10 0 -20 - 40 -50 2.0 3.5 1.0 1.5 2.5 3.0 0.5 30 -10 -30 40 50 20 10 0 -20 - 40 -50 2.0 3.5 1.0 1.5 2.5 3.0 0.5 30 -10 -30 2 1 3 4 5 2 1 3 4 5 2 1 3 4 5 2 1 3 4 5 2 1 3 4 5 2 1 3 4 5 2: -27.83 db 1.5 ghz 1: -29.06 db 1.0 ghz 3: -27.417 db 2.0 ghz 4: -27.232 db 2.5 ghz 5: -27.188 db 3.0 ghz 2: -27.82 db 1.5 ghz 1: -29.042 db 1.0 ghz 3: -27.49 db 2.0 ghz 4: -27.314 db 2.5 ghz 5: -27.263 db 3.0 ghz 2: -29.789 db 1.5 gh z 1: -27.651 db 1.0 gh z 3: -26.145 db 2.0 gh z 4: -25.035 db 2.5 gh z 5: -29.816 db 3.0 gh z 2: -34.329 db 1.5 gh z 1: -27.881 db 1.0 gh z 3: -26.93 db 2.0 gh z 4: -24.21 db 2.5 gh z 5: -27.508 db 3.0 gh z 2: -31.956 db 1.5 ghz 1: -28.217 db 1.0 ghz 3: -26.809 db 2.0 ghz 4: -24.553 db 2.5 ghz 5: -27.835 db 3.0 ghz 2: -28.172 db 1.5 gh z 1: -26.027 db 1.0 gh z 3: -24.749 db 2.0 gh z 4: -23.224 db 2.5 gh z 5: -26.391 db 3.0 gh z
UPG2214TK UPG2214TK remark the graphs indicate nominal characteristics. output power p out (dbm) input power p in (dbm) output power vs. input power 30 20 5 20 30 12 16 24 26 10 25 15 10 14 22 18 28 f = 2 ghz
UPG2214TK recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recommended below, contact your nearby sales of?ce. soldering method soldering conditions condition symbol infrared re?ow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ir260 vps peak temperature (package surface temperature) : 215 c or below time at temperature of 200 c or higher : 25 to 40 seconds preheating time at 120 to 150 c : 30 to 60 seconds maximum number of re?ow processes : 3 times maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below vp215 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of ?ow processes : 1 time maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperature (pin temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin ?ux (% mass) : 0.2%(wt.) or below hs350 life support applications these nec products are not intended for use in life support devices, appliances, or systems where the malfunction of these prod ucts can reasonably be expected to result in personal injury . the customers of cel using or selling these products for use in such applications do so at their own risk and agree to fully indemnify cel for all damages resulting from such improper use or sale. a business partner of nec compound semiconductor devices, ltd. 02/07/2005 caution do not use different soldering methods together (except for partial heating).

▲Up To Search▲

Price & Availability of UPG2214TK

	To Download UPG2214TK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .